Here we have our V2 extended trackwidth arms available for the mk3 Supra a70/z20 Soarer.
The lower is live adjustment so no more removing the rod ends from the subframe to make changes.
The "zero" setting on these arms you will have the large adjuster wound all the way in and have the Rod end wound out 10mm. This is to allow you room to get your tools onto the jam nuts.
From this position you have 18mm of adjustment available this means that your large adjuster and and 20mm rod end can be moved 9mm each from their "zero" position.
So the large adjuster can be a maximum of 9mm out and the rod end a total maximum of 19mm out. Anything more than this may result in insufficient thread engagement on the large adjuster in particular.
***Production arms will be powdercoated black
The upper arms feature bushed ends on the subframe end and live adjustment through the rose joint at the hub end of the arm.
Also included in this kit is extended inner tierods these will work with the factory outer tierods and also our angle kits we have available for this chassis. Add the angle Kit if you don't have one already.
Included in kit
*Pair extended upper control arms
*Pair extended lower control arms
*Extended inner tierods to suit the arm length
Optional
*Bolt on angle kit
*Dustboots
With our new version of Angle kit on our test car we have over 60 degrees of angle.
Whilst we have aimed to put all of the best parts available into making this product every country has its own sets of laws and standards on vehicle modification for this reason we state this product is strictly for off road use only.
Spare parts
Rod ends
lcas -m20 x1.5 Left
Angle kit
If black 5/8 thread 1/2" eye high misalignment
If silver 5/8 thread 5/8 eye with misalignment spacers
Upper arms 5/8 thread 5/8 eye
Inner tierods toyota part numbers