Mk3 Supra A70 Billet Performance Knuckle
Mk3 Supra A70 Billet Performance Knuckle
Mk3 Supra A70 Billet Performance Knuckle
Mk3 Supra A70 Billet Performance Knuckle

Mk3 Supra A70 Billet Performance Knuckle

Regular price $ 2,750.00 NZD
/

Billet Performance Front Knuckles- Toyota Supra A70 (86-92) and Z20 Soarer (86-91)

These knuckles are designed to improve the handling and adjustment of the A70 supra for drifting, circuit/road racing and drag racing. Machined from extremely strong yet lightweight 7000 series aluminium and hard anodized to prevent corrosion. The steering tie road is attached in double shear for optimized strength and rigidity.

Compatible with factory control arms or our own aftermarket replacements.

Key benefits:
Adjustable steering via swappable plates, your choice of:  

*Stock steering
*High angle/ quick steering and positive Ackerman
*High angle/quick steering and low Ackerman
*High angle/quick steering and negative Ackerman

Drop knuckle, lowers your car 20mm compared to standard knuckle without disrupting factory geometry to keep roll centre and camber curve optimised.

Uses bolt on wheel bearing/ hub assembly from Lexus IS250/350. easy serviceability, wheel bearing comes with integrated speed sensor. wheel stud pattern is 5x114.3 (same as factory). Centre bore suits A80 brake rotor 

Multiple brake options, we offer changeable bracket for either the A70 or A80 brake setup. Most aftermarket kits to suit these chassis should work. caliper is moved to the front of the knuckle to increase clearance to control arms

Weight, 2kg (4.5lbs) is saved per knuckle

Notes: The A70 factory brake caliper requires clearance with a grinder to bolt on. The  factory Supra ABS system is not compatible with the supplied wheel speed sensor.

Kit includes: billet base knuckle, 1x steering plate See other listing if you wish to get extra plates, 1x set of brake adapter plates, tie rod adapters and high misalignment heim joints and all necessary hardware.

Wheel bearing assemblies not included in the base price, they can be purchased separately and can be machined to the A70 brake rotor on request.